nke China mgbaze Yellow 160: 1 / CAS 35773-43-4 ụlọ ọrụ na ndị na-emepụta |Agba ziri ezi
  • ọkọlọtọ0823

Agba odo odo 160: 1 / CAS 35773-43-4

Nkọwa dị mkpirikpi:

Solvent Yellow 160:1 bụ ihe na-acha akwụkwọ ndụ akwụkwọ ndụ na-acha odo odo fluorescent.
Ọ nwere ezigbo nguzogide okpomọkụ na ọkụ ọkụ, ezigbo nkwụsị ọpụpụ na ike tinting dị elu na ngwa ngwa.
A na-ekwe ka 160 Yellow Solvent 160: 1 mee ihe na eriri polyester, yana njedebe ejiri ya na eriri PA6.
Ị nwere ike ịlele TDS nke Solvent Yellow 160:1 n'okpuru.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Aha ngwaahịa Presol FY 10GN

Agba agba agba odo 160:1

Ụdị Nnyefe ntụ ntụ

CAS35773-43-4

EINECS NO.252-722-2

Nka na ụzụ Njirimara:

Agba odo odo 160:1bụ ihe na-acha akwụkwọ ndụ akwụkwọ ndụ fluorescent agba.
Ọ nwere ezigbo nguzogide okpomọkụ na ọkụ ọkụ, ezigbo nkwụsị ọpụpụ na ike tinting dị elu na ngwa ngwa.
Ihe mgbaze edo 160:1 ekwe ka e were npolyestereriri, na oke ejiri ya na eriri PA6.
Ị nwere ike ịlele TDS nke Solvent Yellow 160:1 n'okpuru.

CmmanụShadde

 ee

Ngwa: ("Karịrị,""Ọdabara,""Ọ bụghị kwadoro)

PS

HIPS

ABS

PC

RPVC

PMMA

SAN

AS

PA6

PET

Enwere ike iji napolyestereriri

Anụ ahụ Njirimara

Njupụta (g/cm3)

Ebe mgbaze()

Ìhè ngwa ngwa

(in PS)

Akwadoro Usoro onunu ogwu

N'ụzọ doro anya

Enweghị nghọta

1.45

209

6

0.03

0.05

Ọsọ ọkụ: Ọ mejupụtara 1st ruo 8th grade, na 8th ọkwa dị elu, 1st grade dị njọ.

Nguzogide okpomọkụ na PS nwere ike iru 300

Resin

PS

ABS

PC

PET

Nguzogide okpomọkụ(℃)

300

280

300

280

Ogo nke pigmentation: 0.05% e ji esiji ákwà + 0.1% titanium dioxide R

Ihe mgbaze Yellow160:1solubility na organic mgbaze na 20(g/l)

Acetone

Butyl Acetate

Methylbenzene

Dichloromethane

Ethylalcohol

5.2

4.2

10.6

2.3

5.1

Note: Nke n'elu ozi is enyere as ntuziaka maka nke gị ntụaka naanị.Mmetụta ziri ezi kwesịrị ịdabere na nsonaazụ ule na ụlọ nyocha.

——————————————————————————————————————————————————————— —————————

Ozi ndị ahịa

 

Ngwa

Presol Dyes nwere nnukwu ọnụma nke ihe eji esiji na-agbaze polymer nke enwere ike iji agba ụdị plastik dị iche iche.A na-ejikarị ha eme ihe site na masterbatches ma tinye n'ime eriri, ihe nkiri na ngwaahịa plastik ndị ọzọ.

Mgbe ị na-eji Presol Dyes n'ime plastik injinia nwere ezigbo nhazi chọrọ, dị ka ABS, PC, PMMA, PA, naanị ngwaahịa akọwapụtara ka akwadoro.

Mgbe ị na-eji Presol Dyes n'ime thermo-plastics, anyị na-atụ aro ka ị gwakọta ma fesaa akwa ahụ nke ọma yana ọnọdụ nhazi kwesịrị ekwesị iji nweta mgbasa nke ọma.Karịsịa, mgbe ị na-eji ngwaahịa na-agbaze dị elu, dị ka Presol R.EG (Solven Red 135), mgbasa ozi zuru oke na nhazi nhazi kwesịrị ekwesị ga-eme ka ọ dịkwuo mma.

Presol Dyes na-arụ ọrụ dị elu na-eme mkpesa na iwu zuru ụwa ọnụ na ngwa dị n'okpuru:

● Nkwakọ ngwaahịa nri.

● Ngwa metụtara nri.

● Ihe egwuregwu ụmụaka.

 

QC na asambodo

1) Ike R & D dị ike na-eme ka usoro anyị dị na ọkwa na-eduga, yana usoro QC ọkọlọtọ na-agbaso ụkpụrụ EU chọrọ.

2) Anyị nwere ISO & SGS akwụkwọ.Maka ndị na-agba agba maka ngwa nwere mmetụta, dị ka kọntaktị nri, ihe egwuregwu ụmụaka wdg, anyị nwere ike ịkwado AP89-1, FDA, SVHC, na ụkpụrụ dịka EC Regulation 10/2011.

3) Nnwale ndị a na-eme mgbe niile na-agụnye agba agba, ike agba, nkwụsị ọkụ, Mbugharị, ngwa ngwa ihu igwe, FPV (Uru Nrụgide Ihe nzacha) na Mgbasa wdg.

  • ● Ụkpụrụ ule Shade agba bụ EN BS14469-1 2004.
  • ● Ọkọlọtọ Nguzogide okpomọkụ dị ka EN12877-2 si dị.
  • ● Ọkọlọtọ nnwale mbata bụ EN BS 14469-4.
  • ● Ọkọlọtọ nnwale mgbasa ozi bụ EN BS 13900-2, EN BS 13900-5 na EN BS 13900-6.
  • ● Ọkọlọtọ nnwale ọkụ / ihu igwe dị ka DIN 53387/A si dị.

 

Mbukota na mbupu

1) Ngwunye oge niile dị na 25kgs akwụkwọ, katọn ma ọ bụ akpa.Ngwaahịa ndị nwere obere njupụta ga-ejupụta na 10-20 kgs.

2) Ngwakọta na ngwaahịa dị iche iche na ONE PCL, na-abawanye arụmọrụ ọrụ maka ndị ahịa.

3) Isi ụlọ ọrụ na Ningbo ma ọ bụ Shanghai, ha abụọ bụ nnukwu ọdụ ụgbọ mmiri nke dị mma maka anyị na-enye ọrụ lọjistik.


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya